VMP1 - Kontron VMP1 CPU Board - 3U PowerPC - VME...
- Part Number:
- VMP1
- Model Number:
- VMP1
- Make:
- KONTRON
- Lead Time:
- Available
- Qty In Stock:
- Available
Kontron VMP1 CPU Board - 3U PowerPC - VME 3U PowerPC MPC8240 Simple Type: CPU Board
A well-balanced design achieving a maximum of computer performance versus power dissipation, realized using the highly integrated Freescale MPC8240 PowerPC, embedded in a rugged design.
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- 32/64/128 MB SDRAM (ECC) onboard
- Ethernet interface 100/10 BaseT
- Extended temperature range -40 C to +85 C
- Freescale MPC8240 PowerPC @ 250 MHz
- Low power consumption: 6.8 Watt typical
- Up to 144 MB FLASH or 0.5 MB NVRAM on socket
- Up to 8 MB soldered Flash
- VxWorks and Linux support
Specifications
- Chipset Integrated: 32 bit/33 MHz;5 V Signaling; Up to two expansion modules are stackable. 8 HP/12 HP version with one/two PMC slots or two/four PC*MIP slots.This port can also be used to add customized functionality.
- Compliance: Temp. Ranges: 0 °C to + 70 °C (standard) –40 °C to + 85 °C extended) –55 °C to + 125 °C (storage) Oper. Humidity: 0% to 95% (noncond.) MTBF according to MIL-HDBK 217F VMP1: 164,300h VMP1-101: 251,000h Power Consumption: + 5V 6,8W*/typ. + 12V 0W* –12V 0W* *Without PCI Expansion Module and at 266 MHz, 64 MB SDRAM, 8MB Flash Dimensions: 100 mm x 160 mm (3U card size) Front Panel Height:: 128.5 mm ; Width: 20 mm (0.8 inch)/4 HP Weight: 180 g
- Max Data Transfer Rate: Up to 128 MB direct soldered SDRAM/64 bit/100 MHz with ECC protection (8 bit parity) Up to 8MB direct soldered Flash (Boot Device and Program Storage) DIL Socket for: NV-SRAM (up to 512 kB)/Cell Storage Life 10 years Flash DiskOnChip (up to 144 MB)
- Max. Speed: A Universal Boot Loader supports the start of any operating system like WindRiver’s VxWorks
- Miscellaneous: Fast Ethernet Channel 10 Base-T/100 Base-TX; RJ-45; LAN Status LED’s (Activity, Link, Speed) integrated IEEE 802.3 10 BASE-T and 100 BASE-TX compatible PHY integrated power management functions dynamic transmit chaining with multiple priorities transmit queues full duplex support at both 10 and 100 Mbps operation IEEE 802.3u Auto-Negotiation support 3 Kbyte Transmit FIFO and 3 Kbyte Receive FIFO back-to-back transmission support with minimum inter frame spacing IEEE 802.3 x 100 BASE-TX Flow Control support TCP/UDP checksum off-load capabilities Two RS232 ports, 16550 compatible Dual UART; RJ-45 Two push buttons RESET,ABORT (NMI) Board Status LED’s (watchdog active, general purpose)
- Processor: Integrated PowerPC microprocessor Motorola MPC8240 L1 cache 2 x 16 kB data/instruction cache; Internal processor core MPC603e Core Frequency 200 MHz or 250 MHz 6.6 SPECint95 5.5 SPECfp95 375 Dhrystone (2.1) MIPS PCI bridge and PCI arbiter Two channel controller DMA with chaining Programmable IRQ controller Multiple timers and counters
- Processor: Motorola MPC8240
- Socket: Timers: Four 32-bit timers, one 16-bit timer, one watchdog timer RTC: backup via GoldCap (5 days) or optional via replaceable battery (10 years) Debug Port: JTAG/BDM; 16 Pin row connector
- VME Interface: ANSI/VITA 1-1994 VME64 interface on P1 (IEEE STD 1014); Universe 2 DTB Master/Slave A16-A24; D08-D16 9 user programmable slave images on VME and PCI bus 4 mailboxes and location monitors for message oriented systems 7 IRQ lines with flexible mapping
Applications
- None Available
Aliases
- None Available