KONTRON Industrial Partner

1021-9625 - CPCI/PICMG 2.16 Intel Core Duo T2500 2.0 GHz, 2xGig Ethernet...

larger image

Request Quote
For Price
Part Number:
1021-9625
Model Number:
CP6012
Make:
KONTRON
Lead Time:
Available
Qty In Stock:
Available

CPCI/PICMG 2.16 Intel Core Duo T2500 2.0 GHz, 2xGig Ethernet on FP, 2xGig Ethernet on PICMG2.16/RIO, 3.3V I/O Simple Type: - TBD -

Download the datasheet (PDF)

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.

Features

  • 4HP, single slot CPU with passive cooling
  • 4x GigEthernet Interfaces via PCIExpress
  • Latest IO technology with USB 2.0 channels and SATA
  • Rear I/O supporting PICMG 2.16
  • Scalable processor speed, Intel Core2 Duo up to 2.16 GHz Support of latest PSB performance with 667 MHz
  • Up to 4GB DDR2 400 MHz SDRAM via two SODIMM sockets
  • XMC/PMC + onboard HDD + CompactFlash configuration possible

Specifications

    General
  • Channel: PICMG 2.0 Rev. 3.0 compatible, 64-bit / 66 MHz. 5V or 3.3V signalling, REQ/GNT for 7 slots Operating in system slot as system master and in peripheral slot in PCI passive mode (no communication to CompactPCI bus)
  • Cooling: CompactPCI Core Specification PICMG 2.0 Rev. 3.0 CompactPCI Hot Swap Specification PICMG 2.1 R2.0 CompactPCI System Management PICMG 2.9 R1.0 CompactPCI Packet Switching Backplane PICMG 2.16 R1.0 Designed to meet or exceed: Safety: UL 1950, UL 94, CSA 22.2 No 950, EN 60950, IEC 950 EMI/EMC: EN 55022 / EN 55024, EN 50081-1 / EN 6100-6-2
  • Environment: Operating temp.: 0°C to +60°C standard with LV 1.66 GHz (with forced airflow) Storage temp.: - 55°C to + 85°C (without battery or HDD) Climatic Humidity: 93% RH at 40°C, non condensing (acc. to IEC 60068-2-78) Altitude: 50,000 ft (15,240 m)
  • Environmental: Front I/O Rear I/O Onboard Connector Total Video: 1 1 - 1 USB: 2 2 - 4 Serial: 1 2 - 2 PS/2 Mouse: - 1 - 1 PS/2 Keyboard: - 1 1 1 Ethernet: 2 2 - 4 ATA100: - 1 - 1 SATA150: - 2 1 2 CompactFlash: - - 1 1 PMC or XMC: 1 via J4 4/1 1 Floppy: - 1 - 1
  • I/O: Four 10/100/1000 MB/s Gigabit Ethernet ports based on two Intel 82571EB dual Gigabit Ethernet PCI Express bus controllers (two copper ports are routed to the front and two copper ports are routed to PICMG 2.16 rear pins) Four USB 2.0 interfaces with up to 480 Mbit/sec, two front, two rear VGA Video Controller ATI ES1000 2D-engine, PCI 32-bit / 33 MHz, external memory 64MB Two 16C550 compatible UARTs (COM1/2) Keyboard on rear and onboard connector Mouse interface on rear Floppy disk controller on rear
  • IrDA: IPMI 1.5-compliant for IPMI based management and CompactPCI System Management PICMG 2.9 R1.0
  • Max Capacity: Intel® E7520 supporting various RASUM features
  • Max Data Transfer Rate: Up to 4 GB DDR2 400 MHz dual channel registered SDRAM w/ ECC via two 200-pin SODIMM sockets for max. 6.4 GByte/sec data throughput 2 redundant 1 MB Firmware Hubs (FWH) for BIOS 8 kB for storing CMOS data when operating without battery
  • Max. Speed: AMI BIOS with POST codes, setup console redirection to serial port (VT100 mode) with CMOS setup access, BIOS parameters saved in EEPROM, diskless, keyboardless, videoless operation LAN boot support Board identification number accessible via EEPROM Support for Windows® XP, XP Embedded, Windows® Server 2003, Linux®, VxWorks
  • Memory: Dimensions: 233 x 160 x 20.5 mm, 6U, 4HP Weight: 400g MTBF: 157,696h @ 30°C / 86°F (Bellcore Issue 6)
  • Miscellaneous: COM1: 9-pin D-Sub (RS232) VGA: 15-pin D-Sub SVGA connector Ethernet: 2x RJ-45 USB: 2x 4-pin connectors PMC/XMC: opening for PMC/XMC front panel LEDs: 2x LAN activity (yellow) and speed (green) one blue control LED for hot swap 2x for IPMI, 1x watchdog, 1x thermal control 8-LED-field for BIOS POST code or general purpose Reset: reset button, guarded Micro switch: for hot swap
  • PCI: One 64-bit / 66MHz PMC slot, Pn1-Pn4, rear I/O Pn3 to J4, 3.3 V PCIvoltage Alternatively one XMC slot via P15, supporting XMC.3 x8 PCIExpress
  • Power Requirement: CP601264 equipped with 2GB memory: LV 1.5 GHz: max 39 W 2.16 GHz: max 56 W
  • Processor: Intel® CoreTM2 Duo processor in micro-FCBGA package (65nm manufacturing process) T7400: 2.16 GHz, 667 MHz FSB, 4 MB L2, FCBGA L7400: LV 1.5 GHz, 667 MHz FSB, 4 MB L2, FCBGA All board versions are provided with a passive heatsink within 4HP height. Forced air cooling at a specific flow rate is required.
  • Socket: Watchdog, software configurable, 125 msec to 256 sec, generates IRQ, NMI or hardware reset. Hardware monitor for thermal control, fan speed, and all onboard voltages RTC (integrated in 6300ESB) and CMOS RAM with backup, battery replaceable
  • System Monitor: One SATA connection for an onboard 2.5" SATA HDD CompactFlash type II socket 22-pin connector with all LPC signals PS/2 keyboard connector 2x 200-pin SODIMM connectors 4x 64-pin PMC interface 1x 114-pin XMC connector
  • Wake On LAN: J3: PICMG 2.16, VGA, COM 1/2, keyboard, mouse, USB 3/4 J4: PMC rear I/O J5: SATA 1/2, IDE (secondary)

 

Applications

  • None Available

Aliases

  • None Available