KONTRON Industrial Partner

CP6016-2.53-2G - 6U 4TE CPCI Core™2 Duo T9400 System Master CPU; 2.53GHz,...

larger image

Request Quote
For Price
Part Number:
CP6016-2.53-2G
Model Number:
CP6016-2.53-2G
Make:
KONTRON
Lead Time:
Available
Qty In Stock:
Available

6U 4TE CPCI Core™2 Duo T9400 System Master CPU; 2.53GHz, 6MB L2, 2GB DDR2 667 MHz SO-RDIMM; I/O: 5x GigE, VGA, COM, 7x USB, 6x SATA, USB Flash Sockel, J1-J5 Simple Type: - TBD -

Download the datasheet (PDF)

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.

Features

  • 4HP, single slot CPU with passive cooling
  • 5x GigEthernet Interfaces via PCIExpress
  • Latest IO technology with USB 2.0 channels and SATA RAID
  • Rear I/O supporting PICMG 2.16
  • Scalable processor speed, Intel® Core™2 Duo up to 2.53 GHz Support of latest PSB performance with 1066 MHz
  • Up to 16GB DDR2 667 MHz SDRAM via two SO-RDIMM sockets with ECC
  • XMC/PMC + onboard HDD + USB NAND Flash configuration possible

Specifications

    General
  • BIOS: Two redundant 4 MByte SPI Flashes
  • Cooling: CompactPCI Core Specification PICMG 2.0 Rev. 3.0 CompactPCI Hot Swap Specification PICMG 2.1 R2.0 CompactPCI System Management PICMG 2.9 R1.0 CompactPCI Packet Switching Backplane PICMG 2.16 R1.0 Designed to meet or exceed: - Safety: UL 1950, UL 94, CSA 22.2 No 950, EN 60950, IEC 950 - EMI/EMC: EN 55022 / EN 55024, EN 50081-1 / EN 6100-6-2
  • Environment: Operating temp.: 0°C to +60°C, passive module heat sink, requires forced airflow cooling Storage temp.: - 55°C to + 85°C (without battery or HDD) Climatic Humidity: 93% RH at 40°C, non condensing (acc. to IEC 60068-2-78) Altitude: 50,000 ft (15,240 m)
  • Environmental: (Front I/O) (Rear I/O) (Onboard Connector) (Total) Video CRT VGA: 1 1 - 1 USB 2.0: 2 4 1 (Flash) 7 HDAudio: - 1 - 1 Serial: 1 2 - 2 PS/2 Mouse: - 1 - 1 PS/2 Keyboard: - 1 - 1 Ethernet: 3 2 - 5 SATAJ: - 4 2 6 USB Flash: - - 1 1 PMC / XMC: - - 1 / 1 1 / 1 FAN control: - 2 - 2 Battery Input: - 1 - 1 SMB: - 1 - 1
  • External Card: Serial EEPROM (24LC64) 64 kbit
  • Input: Intel ICH9R, 6x SATA II controllers, 7x USB 2.0, one x1 PCI Express, LPC, HDA
  • IrDA: IPMI 1.5-compliant for IPMI based management and CompactPCI System Management PICMG 2.9 R1.0 H8S/2166 controller with on-chip 512 kB Flash and external 8 Mbit SPI Flash
  • Max Capacity: Intel 5100 chipset with dual-channel DDR2 memory controller with ECC, six x4 PCI Express ports
  • Max Data Transfer Rate: speed of 667 MHz per channel, and up to 16 GB on two SO-RDIMM sockets
  • Max. Speed: AMI EFI (BIOS) with POST codes, setup console redirection to serial port (VT100 mode) with CMOS setup access, BIOS parameters saved in EEPROM, diskless, keyboardless, videoless operation LAN boot support Board identification number accessible via EEPROM Support for Windows® XP, XP Embedded, Windows® Server 2003, Linux® (other OSs may be possible, please contact us for information)
  • Memory: Dimensions: 233 x 160 x 20.5 mm, 6U, 4HP Weight: 900g
  • Miscellaneous: Gigabit Ethernet: Three 1000BASE-T Ethernet on the FP Serial Port: One RS232 interface on RJ45 connector USB interface: Two USB 2.0 ports, 4-pin standard USB host VGA: One 15-Pin D-Sub connector for analog monitors; ATI ES1000 graphic controller with PCI 32-bit / 33MHz interface Reset button: One reset button Micro Switch: For Hot Swap LEDs: Eight bicolor (red and green) control and status LEDs Two IPMI LEDs One Watchdog and one thermal LED Four GP LEDs One blue hot Swap LED
  • On-board EIDE: Up to 8 GB NAND Flash Module
  • Power Requirement: Maximum: 64 watts; typically: =< 50 watts
  • Processor: Intel Penryn SV Processor in uFBGA package (45 nm manufacturing process) 2.53 GHz, 1066 MHz FSB, 6 MB L2 cache
  • Socket: Watchdog, software configurable, 125 msec to 256 sec, generates IRQ or hardware reset. Hardware monitor for thermal control, fan speed, and all onboard voltages RTC battery backup
  • System Memory: Dual channel registered DDR2 memory with ECC and data
  • System Monitor: Gigabit Ethernet: Two PICMG 2.16 rear I/O 1000BASE-T ports SATA: Four ports fixed to rear I/O One port routed to a standard SATA connector One port available for mounting an optional 2.5” HDD USB NAND Flash: One port available for mounting an optional NAND Flash module Serial Ports: Two RS232 ports: COM1 routed to front panel and rear I/O COM2 routed to rear I/O only CPCI Bus: PICMG 2.0 Rev. 3.0 compatible, 64-bit / 66 MHz Universal V(I/O) 5V or 3.3V signalling Operating in system slot as system master and in peripheral slot in PCI passive mode (no communication to CompactPCI bus) PMC/XMC: One 64-bit / 133 MHz PMC slot, Pn1-Pn4, rear I/O Pn3 to J4, 3.3 volt V(I/O) Alternatively one XMC slot via P15, supporting XMC.3 x8 PCIExpress Rear I/O: J3: PICMG 2.16, VGA, COM 1/2, keyboard, mouse, 4x USB J4: PMC rear I/O J5: 4x SATA, HDA, battery, fan control
  • Video Controller: Trusted Platform Module (TPM) 1.2 for enhanced hardware and software based data and system security

 

Applications

  • None Available

Aliases

  • None Available