AM4500 - Kontron AM4500 Mezzanine Card | AdvancedMC SATA Storage Module, 60...
- Part Number:
- AM4500
- Model Number:
- AM4500
- Make:
- KONTRON
- Lead Time:
- Available
- Qty In Stock:
- Available
Kontron AM4500 Mezzanine Card | AdvancedMC SATA Storage Module, 60 Gb+ | Full-size/Mid-siz, Single Width Simple Type: AdvancedMC Storage Module
Built in accordance to the PICMG AMC.0 R2.0 specification, the AM4500 module is also PICMG AMC.3 R1.0 compliant, and features Native Command Queuing (NCQ) with up to 32 instructions to be queued and reordered. The AM4500 storage module features a SATA switching port device which enables the system to interconnect AMC port 2 or 3 to SATA drive port 0, which can be set automatically by the MMC. This makes it possible to design redundant storage configurations for MicroTCA open modular platforms. AdvancecdMC modules are also key to extending the value of AdvancedTCA platforms designed for multiple applications in wireless / wireline network infrastructures.
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- 120GB and 250GB at 7200 RPM capacity
- 24 hours / 7 days operation
- Mid-Size and Full-Size, Single Width (AMC.0 R2.0)
- PICMG AMC.3 R1.0 compliant
- S.M.A.R.T. Technology
Specifications
- Access: 7200 RPM, avg read/seek time 10.5 ms
- Altitude (Designed to meet or exceed): Operating:4,000 m / 13,123 ft; Storage and Transit:15,000 m / 49,212 ft
- Characteristics: NEBS level 3; 24 hours / 7 days operation;,MTBF: > 1 008 000 hours @ 40 C / 104 F (Telcordia SR-332, Issue 1) No Hard Disk
- Compliance: PICMG AMC.0 R2.0 / AMC.3 R1.0
- Hard Disk Features: Storage capacity: 120GB and 250GB
- Humidity (Designed to meet or exceed): Operating:15% to 90% @55°C/131°F non-condensing; Storage and Transit:5% to 95% @ 40°C/104°F non-condensing
- IPMI Features: Management Controller compliant to PICMG 3.0, AMC.0 and IPMI v1.5 rev 1.1., Management Controller is run time field reprogrammable without payload impact. Robust fail safe reprogrammation implementation (which includes two firmware images) that could perform automatic or manual rollback if a problem occurs during critical reprogramation phase., Remote upgrade capability from all IPMI interfaces (via IPMB), Management Controller self test which can detect failure under its code integrity and trig an automatic rollback.
- Mechanical: Dimensions:181.5 x 75 x 30.16 mm, single-width full-size; 181.5 x 75 x 18.96 mm, single-width mid-size; Weight:350 g
- Power Requirements: Management power is less than 150 mA peak at 3.3V, Payload power is 16W
- Safety / EMC: Meet or exceed:Safety:UL 60950-1; CSA C22.2 No 60950-1-03; EN 60950-1:2001, IEC60950-1; EMI/EMC:FCC 47 CFR Part 15, Class B; CE Mark to EN55022/EN55024/EN300386
- Sequential Bandwidth R/W: 8MB cache 150MB/s burst
- Shock (Designed to meet or exceed): Operating:30G, half-sine 11ms, each axis; Storage and Transit:Bellcore GR-63-CORE Section 4.3
- Supervisory: Hardware system monitor through IPMI (voltage, currents, temperature), temperature monitor / alarm; board temperature sensor, power failure.
- Temperature (Designed to meet or exceed): Operating:0-55°C/32-131°F; Storage and Transit:-40 to +70°C/-40 to 158°F
- Vibration (Designed to meet or exceed): Operating:1.0G, 5-500Hz each axis; Storage and Transit:0.5G, 5-50Hz; 3.0G, 50-500Hz each axis
Applications
- None Available
Aliases
- None Available
