23694 - Kontron 23694 CP303 CPU Board | with LV Mobile Pentium...
- Part Number:
- 23694
- Model Number:
- 23694
- Make:
- KONTRON
- Lead Time:
- Available
- Qty In Stock:
- Available
Kontron 23694 CP303 CPU Board | with LV Mobile Pentium III-M 800MHz, 512KByte L2 cache, 256MByte SDRAM soldered Simple Type: CPU Board
The CP303 3U CompactPCI system controller board combines the performance of Intel‘s Mobile Pentium III processor with the high integration of the 815E chipset and the I/O Controller Hub 2.
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- 4HP, 8HP I/O
- 815 chipset internal or external AGPx4-VGA
- Low Voltage Mobile Pentium III-M / microBGA up to 800MHz
- Optional rear I/O support
- Two fast ethernet channels
- Two serial channels
- Up to 512 MByte SDRAM, 256MB soldered + one SODIMM socket
Specifications
- Bus Interface: PICMG 2.0 Rev. 3.0 compatible, 64-bit/33MHz System master 5V VI/O (3.3V on request), 7 Req/Gnt & clock lines Version with rear I/O on J2 PICMG 2.0
- Connector: CP303 and CP303-V: Intel® 82801 ICH2 providing the following functions: - 10/100Base-TX Ethernet controller - Two EIDE interfaces, Ultra ATA 100, 100MB/sec - Two USB controllers, 4 ports, USB1.1 compliant UART with two 16C550 compatible RS232 ports CP303: Intel® 82559 based 10/100Base-TX Ethernet controller 4HP: 82815 GMCH providing 2D/3D graphics accelerator, 1280x1024x16/75Hz or 1200x1600x256/60Hz analog and digital output 8HP IOIDE: IDE, Floppy, LPT port as onboard pin row Onboard 2.5“ EIDE Flash Disk or HDD mounting option PS/2 for keyboard and mouse legacy support Additional 2 COM ports (front IO), 4 COM ports in total
- Cooling: CompactPCI Core Specification PICMG 2.0 Rev. 3.0 CompactPCI Hot Swap Specification PICMG 2.1 R2.0 Designed to meet or exceed: Safety: UL 1950, CSA 22.2 No 950, EN 60950, IEC 950 EMI/EMC: EN 55022 / EN 55024, EN 50081-1 / EN 6100-6-2
- Environment: Operating temp.: 0°C to +60°C standard -40°C to +85°C E2 (optional) Storage temp.: -55°C to +95°C Climatic Humidity: non condensing 93% at 40°C (acc. to IEC 60068-2-78) Altitude: 50,000 ft. (15,240 m)
- Max Data Transfer Rate: 133 MHz processor side bus, Intel® 82815 GMCH CP303: 256MByte soldered SDRAM (no ECC) 256MByte SDRAM via 144-pin SODIMM 1MB Firmware Hub for general purpose CP303-V: up to max. 512MByte SDRAM via 144-pin SODIMM Optional CompactFlash socket type II or onboard 2.5“ HDD mounting 1MB Firmware Hub (FWH) for BIOS 256 Byte EEPROM for CMOS data storing (no battery operation) 256 Byte EEPROM for user purpose
- Max. Speed: Award BIOS with POST codes, setup console redirection to serial port (VT100 mode) with CMOS setup access, BIOS parameters saved in EEPROM, diskless, keyboardless, videoless operation. LAN boot support. Board identification number accessible via EEPROM Support for Windows® 2000, XP, Linux®, VxWorks®
- Memory: Dimensions: 100mm x 160mm, Jumperless design Weight: 300g / 4HP MTBF: 101,000 h
- Miscellaneous: 4HP with CP303: Ethernet: Two RJ-45 with integrated LEDs (ACT, SPEED) Top connector: VGA-CRT 15-pin D-Sub SVGA connector USB: Two 4-pin connectors LEDs: ACT, SPEED (LAN), Thermal, Watchdog or both general purpose 4HP with CP303-V: Ethernet: One RJ-45 with integrated LEDs (ACT, SPEED) Top connector: VGA-CRT 15-pin D-Sub SVGA connector USB: Two 4-pin connectors LEDs: ACT, SPEED (LAN), Thermal, Watchdog or both general purpose 8HP-IOIDE (in addition to 4HP): COM1/2: 9-pin D-Sub (RS232/422/485 jumper selectable) Keyboard/Mouse: PS/2 Reset: Reset button, guarded LED: HDD active
- OS: Support for all signals to allow peripheral boards to be hot swapped. The individual clocks for each slot and access to the backplane ENUM# signal comply with the PICMG 2.1 Hot-Swap specification.
- Power Requirement: +5V/4W, +3.3V/6W, max. 10W at 400MHz +5V/8W, +3.3V/6W, max. 14W at 800MHz
- Processor: Intel Pentium III
- Processor: Mobile low voltage Pentium® III, Micro-FCBGA 478, 512KByte full speed L2 on-die cache. Based on the 0.13u silicon process with 1.15V core voltage (or even 0.95V for the ULV version) resulting in lower power dissipation. All processor versions with passive heat sink CP303: - 800MHz LV low power dissipation CP303-V: - 400MHz ULV Celeron ultra low power dissipation Depending on processor version forced air cooling at a specific flow rate might be required in the chassis.
- Socket: Watchdog, software configurable, 125 msec to 256 sec. generates IRQ, NMI or hardware reset, two stage configuration for NMI and Reset Hardware monitor LM81 for thermal control, fan speed and all onboard voltages Processor temperature monitoring MAX1617 (on-die and board) RTC and CMOS RAM with backup, battery replaceable
- System Monitor: AGP, PCI and LPC (Low Pin Count - the ISAbus replacement) build the connection between the basic CPU board with any I/O extension module, resulting in a double slot (8HP) solution.
- Wake On LAN: The Rear I/O versions support: - 32-bit/33 MHz CompactPCI interface - Two USB ports - Two COM ports (TTL level) - CRT VGA port - One fan control input - One general purpose output - Input for external backup battery CP303: - Two Ethernet ports without LED CP303-V: - One Ethernet port without LED
Applications
- None Available
Aliases
- None Available
