cPCI-MXP64 - Kontron cPCI-MXP64 CPU Board - 6U CompactPCI 64-bit System Processor...
- Part Number:
- cPCI-MXP64
- Model Number:
- cPCI-MXP64
- Make:
- KONTRON
- Lead Time:
- Available
- Qty In Stock:
- Available
Kontron cPCI-MXP64 CPU Board - 6U CompactPCI 64-bit System Processor Card Simple Type: CPU Board
Kontron’s 6U CompactPCI peripheral processor, featuring scalable multiprocessing and the highest level of hot-swap capability, is the ideal peripheral processor for data/telecommunication, CTI, and industrial control/monitoring markets. The cPCI-MXP64 6U CompactPCI peripheral processor brings scalable multiprocessing capability to the telecom and industrial automation markets. It is designed to operate as a “slave” processor and can be installed in any CompactPCI peripheral slot where a standard system processor, such as Kontron’s cPCI-MXS64 or cPCI-CXS, drives the system slot. The cPCI-MXP64 is also stand-alone operation capable, i.e., it is capable of operation in systems were no system processor is installed. Fully hot-swappable, the cPCI-MXP64 communicates with other processor boards using the CompactPCI backplane as the physical layer of a 1 Gb/s Ethernet.
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- Dual 10/100Base-TX Ethernet and one AGP video controller
- Hot-swappable
- Intel 440BX AGPset
- L2 cache
- PCI-to-PCI non-transparent bridge, multiprocessing using IPTalky
- PMC, USB, serial and parallel ports, PCI EIDE
- Up to 768MB SDRAM even in single slot form factor
- Up to Pentium III processor - Low Power, 700MHz with on-die 256k
Specifications
- Bus Interfaces: Front side bus 100MHz, CompactPCI Bus, 32-bit (33MHz) J1 and J2, PCI-to-PCI 64-bit non-transparent bridge; Intel’s 21554, PCI Mezzanine Card (PMC), cMC series mezzanines with PCI bus, Floppy and EIDE HD support, SMBus, IPMI compliant (for system management of CPU temperature monitoring, DRAM control, Clock buffers and power control)
- Cache: 16K/16K Instruction / Data CPU-internal Level 1, 256KB 64-bit wide on-die Level 2 pipelined burst
- Chipset: Intel 440BX AGP set
- CPU: Pentium III processor Low Power 400MHz and 500MHz
- Data Path: 64-bit on CPU and video memory; 32-bit on local PCI and 32/64-bits on CompactPCI bus
- Flash Memory: 512KB for BIOS field upgrade, Silicon Serial ID TAG for unique board identification accessible via software
- I/O: SMC FDC37C672, USB Ports : Two, Serial Ports: Two (one RS-232, COM1, COM2 configurable as RS-232/422/485, Parallel Port : One bi-directional with all IEEE 1284 protocols supported with BIOS selectable IRQs and addressing, Floppy Disk: Support for two drives (360KB to 1.44MB), EIDE: One channel Bus Master PCI EIDE; support for two IDE drives (type 1 to 4, master/slave configuration); LBA, PIO Mode 0-4 and Ultra DMA/33
- Interrupts: 11 edge/level sensitive and configurable, 4 PCI level sensitive, configurable to any interrupt vector for PnP compatibility
- Memory: Three 168-pin latching DIMM sockets, 64/72-bit (in 4HP configuration, uses Kontron’s memory module), Up to 768MB of SDRAM with parity or ECC (for single bit error correction and double bit error detection)
- Processor: Pentium III Low Power 400MHz and 500MHz
Applications
- None Available
Aliases
- None Available
