KONTRON Industrial Partner

VSBC-32-BASE - Kontron VSBC-32-BASE is a VMEbus single-board computer comprising MC68360...

larger image

Request Quote
For Price
Part Number:
VSBC-32-BASE
Model Number:
VSBC-32-BASE
Make:
KONTRON
Lead Time:
Available
Qty In Stock:
Available

Kontron VSBC-32-BASE is a VMEbus single-board computer comprising MC68360 @ 25MHz, 256 kByte dual-ported SRAM (with Goldcap for back-up). Simple Type: CPU Board

KOntron VSBC-32-BASE is a VMEbus single-board computer comprising MC68360 @ 25MHz, 256 kByte dual-ported SRAM (with Goldcap for back-up), up to 6 serial interfaces without Ethernet support (two available on the front panel as RS232 (RJ45) and an additional four divided between the CXC and SI-interfaces), CXC interface, PEPbug.

Download the datasheet (PDF)

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.

Features

  • 3 config. ser. I/O at frontpanel, 6 in total
  • Extended temperature range -40 C to +85 C
  • Flexible memory: DRAM, Flash, DP-SRAM, ROM
  • Integrated network interface (10Bx)
  • Low power consumption: 3.5 Watt typical
  • Motorola CPU MC68EN360 @ 33 or 25 MHz
  • VxWorks and OS-9 support

Specifications

    General
  • Address Modifier: A24 Access Code : HEX 39/3A/3D/3E A16 Access Code : HEX 29/2D User Defined : HEX 10-17/18-1F
  • CXC Interface: DIN 41612 (C), 96-pin, 3 NMSI ports,DMA
  • Drive Interface: Two independent channels with 32-bit internal/external transfers
  • Environment: Temperature: 0ºC to +70ºC (standard) -40ºC to +85ºC (extended) -55ºC to +85ºC (storage) Humidity: 0 to 95% non-condensing
  • Interrupts: VMEbus IRQ1* - IRQ7* interrupts, enable/disable; SYSFAIL* and ACFAIL* handlers
  • Max Data Transfer Rate: 1/4/8/16/32/64 MByte (32-bit access) DRAM† 1/4 MByte (32-bit access) FLASH† 256 kByte or 1 MByte (16-bit access) ROM or FLASH 256 kByte or 1 MByte dual-ported SRAM with data retention via Goldcap 2 kbit serial EEPROM for applications
  • Memory: 260g (with 10BaseT and memory piggybacks) 100mm x 160mm 3U format; Single-slot (4HP)
  • Miscellaneous: 3 LEDs: red: Halt yellow: Watchdog enabled green: General purpose user 2 Switches: AB: Abort function (NMI) RST: Reset Other LEDs showing Ethernet or RS485 activity are present depending on the version ordered
  • Networking: All Ethernet interfaces conform to IEEE 802-3 and are available on SI-xx piggybacks (only with 68EN360)
  • Power Requirement: Typ. 3W for MC68360 @ 25 MHz Typ. 3.5W for MC68EN360 @ 33 MHz
  • Processor: MC68360 @ 25 MHz MC68EN360 @ 33 MHz
  • Serial: From MC68(EN)360 (ports SMC1 and SMC2) with standard RS232 configuration
  • Serial Lines: Dual-ported SRAM for VME; up to 16 software selectable VME base addresses VME Mailbox IRQ
  • Socket: RTC: V3021 with year, month,week, day, hour, min., sec. Time-out: 4x16, 2x32-bit resolution built-in timers on the MC68(EN)360 Watchdog: Enabled by software with front-panel LED; generates RESET CPU clock: 25 MHz, 33 MHz Communication clock: 24 MHz VME/CXC clock: 16 MHz All serial port baud-rate clocks may be configured individually by software
  • System Controller: Single-level (BR3*), FAIR, RWD (Release When Done); Automatic First-Slot Detection VME and DP SRAM Read-Modify-Write cycle support
  • Tick: Built-in on MC68(EN)360 providing a programmable periodic interrupt
  • Timer: 4x16, 2x32-bit resolution built-in timers on the MC68(EN)360
  • VME Interface: DIN 41612 (C), 96-pin P1 connector A24/A16:D16/D8 master and slave

 

Applications

  • None Available

Aliases

  • None Available