AT8402 - Kontron AT8402 Carrier Board-The AT8402 carrier board is a PICMG...
- Part Number:
- AT8402
- Model Number:
- AT8402
- Make:
- KONTRON
- Lead Time:
- Available
- Qty In Stock:
- Available
Kontron AT8402 Carrier Board-The AT8402 carrier board is a PICMG 3.0 and 3.1 compliant node board for AdvancedTCA shelves, supporting 4 AdvancedMC Mid-Size slots. Simple Type: Carrier Board
Built for Maximum Design Versatility The Kontron AT8402 carrier board is a PICMG 3.0 and 3.1 compliant node board for AdvancedTCA shelves, supporting 4 AdvancedMC Mid-Size slots, ideal for a multitude of application requirements. AdvancedMC-Everywhere integration for customization With support for four AdvancedMC modules, the AT8402 provides equipment manufacturers with exceptional flexibility to customize the design of their network applications. The AT8402 supports a wide assortment of AdvancedMC modules used for processing, storage and I/O applications. A prime example is for the AT8402 to be configured for RAID 5 storage using three (3) SAS AMC Mid-Size modules and one (1) Processor Mid-Size AMC. This enables quick and reliable look up times of wireless customer information integrated into HLR/HSS network elements already built on open modular platforms.
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- Four (4) Mid-Size AMC slots
- Full Hot-Swap capabilities
- IPMI version 1.5 support
- Management via SNMP, TELNET, CLI, eitheer In-band or Out of band via 10/100Base-T Ethernet or RS232
- PCI-Express and Gigabit Ethernet switching
- PICMG 3.0/3.1-compliant base and fabric carrier board
- Redundant Base Interface, and dual redundant Fabric Interface
- Telco Clock for all AMC slots
Specifications
- Altitude (Meet or Exceed): Operating:4000 m (13,123 ft); Storage and Transit:15,000m / 49,212 ft
- AMC Sites: 4 Slot carrier with partial PCB cutaway in the AMC area; B+ connectors (will be updated to press fit connectors as soon as available); AMC.1 Type 4E2S1 on AMC B1 and B3; AMC.1 Type 8E2S2 support on AMC B2 and B4; Telecom clocks and/or PCI Express clock support
- Building Blocks: Ethernet Switch; PCI-Express Infrastructure; SAS/SATA Infrastructure; Ethernet Switch Controller + Memory; Synchronous Clock Distribution; AMC sites; RTM sites (Zone 3); IPMI; Power Supply Mezzanine incl. Holdup Circuit
- Ethernet Switch: Broadcom Strataswitch/StrataGX Gigabit Layer-2 Switch; PCI 32b/66MHz Management IF; Line rate switching for all packet sizes and conditions; Supports 2 Base Channels 10/100/1000Base-T via external Copper PHY; Supports 2 Fabric Channels with 4 1000Base-BX each via internal SERDES, Supports 2 AMC GbE interfaces per AMC slot, Supports 2 SGMII interfaces to the RTM, PHY for Base Interface Connections
- Ethernet Switch Controller & System Memory: Socketless PowerPC IBM PPC405GP 400 MHz; 256 MBytes SDRAM 133 MHz; 64 MB Flash (supports multiple OS images); used for switch provisioning and diagnostics
- Humidity (Meet or Exceed): Operating:15%-90% (non-condensing) at 55°C (131°F); Storage and Transit:15%-90% (non-condensing) at 55°C (131°F)
- IPMI: Dedicated µController; PICMG 3.0 / IPMI 1.5 compliant; Dedicated µController as additional Firmware Update Manager (FWUM) for field upgrades, rollbacks and watchdog functions
- Mechanical: (8U x 280 mm x 30.48 mm)
- MTBF: Targeted MTBF is 150,000h @ 30°C, calculations based on Bellcore/Telcordia SR-332 Issue 1
- PCI-Express Infrastructure: 32-Lane PCI-Express Switch; Serial EEPROM for Configuration Data; Supports 8 PCI-Express Lanes to AMC B2 and B4; Supports 4 PCI-Express Lanes to AMC B1 and B3; Supports 4 PCI-Express Lanes to SAS Controller
- Power Supply Mezzanine: Isolated 48V to 12V Standard Quarterbrick intermediate bus converter; Hot swap support; ‘Holdup’ Circuit using high voltage Capacitor and charge pump, 48V power Supply ‘ORing’ circuit, Point of load regulators for secondary supply voltages (derived from 12V intermediate rail) on base board
- RTM Sites: 3 TYCO/ERNI ZD-F-4-10-2-B-22 Connectors.; Support for 8 RTM lanes from each AMC; FE and RS232 (RJ45) management ports; 4x SAS / SATA connections; 12V and 3V3sus Supply Voltage connections; I²C support; JTAG and production I/O support
- SAS/SATA Infrastructure: 3.0 Gbit/s Serial Attached SCSI Controller; 3.0 Gbit/s Serial Attached SCSI Expander; SAS controller connected to PCI Express switch via 4 PCI Express Lanes; SAS Expander connected to SAS Controller via 4 SAS Lanes; SAS Expander connects to each AMC slot via 1 SAS Lane 2 SAS lanes can be used via RTM; AMC B1 and B2 as well as B3 and B4 are directly interconnected via SATA SAS connection; Onboard SAS/SATA MUX for initiator selection
- Shock (Meet or Exceed): Operating:30G/11 ms half sine; Storage and Transit:50G, 170 inches/second trapezoidal
- Software & Firmware: The system shall support IPMI version 1.5 for board level management (PICMG 3.0).; Reliable field upgrades for all software components; Dual boot images with roll-back capability; Management via SNMP and Command Line Interface; System access via TELNET, SSH and serial line; Hot-Swap support; Hot-Plug support for AMC modules; Redundancy support for base and extension fabric switches
- Standards Compliance: This board is compatible to the following standards:PICMG 3.0 Advanced Telecommunications Computing Architecture (ATCA), PICMG 3.1 opt. 3 Ethernet/Fibre Channel for AdvancedTCA Systems, AMC.0 Advanced Mezzanine Card Base Specification, AMC.1 PCI Express and Advance Switching, D0.96 of AMC.2 Revision 1.0 Gigabit Ethernet, D0.9d of AMC.3 Revision 1.0 Storage, IPMI v1.5, PCI-Express 1.0a
- Synchronous Clock & PCI Express Clock Distribution: Multi-service Line Card PLL; MLVDS Buffer; CPLD for clock distribution and control; PCI Express compliant clock source with optional Spread Spectrum Clock; Switchable PCI Express clock source to all AMCs and to adjacent board via Update Channel 4
- Temperature (Meet or Exceed): Operating:0 °C to 55 °C; Storage and Transit:-40 to +70°C / -10 to 158°F
- Vibration (Meet or Exceed): Operating:5 to 100Hz: 1G @ 0.25 Octave/minute; Storage and Transit:5 to 50Hz: 0.5G @ 0.1 Octave/minute
Applications
- None Available
Aliases
- None Available
