AT8030 - ATCA Processor Board. Triple Intel® Core™2 Duo Simple Type: PROCESSOR...
- Part Number:
- AT8030
- Model Number:
- AT8030
- Make:
- KONTRON
- Lead Time:
- Available
- Qty In Stock:
- Available
ATCA Processor Board. Triple Intel® Core™2 Duo Simple Type: PROCESSOR BOARDS
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- 1 X Mid-Size AdvancedMC bay
- 10 GbE on the fabric
- Dedicated SDRAM memory per CPU core
- Full IPMI support and remote management of each CPU engines via any IPMI channels
- Onboard Flash Disk with up to 2 GB dedicated for each CPU
- Onboard Gigabit Ethernet switch fully manageable via PowerQuick III processor
- Optional 2.5-inch SATA or SAS HDD via AMC or RTM
- PCI Express x4 and dual GbE connectivity
- Triple Intel® Core™2 Duo
Specifications
- BIOS: AMI BIOS Warm reset support with memory protection for post-mortem analysis Save CMOS in SEEPROM option Boot from gigabit Ethernet (CPU 1/CPU2 Base and Fabric interfaces and management Lan) Boot from SAS Boot from USB 2.0 (Floppy, CD-ROM, Hard Disk) Auto configuration and extended setup Diskless, Keyboard less, and battery less operation extensions System, video and LAN BIOS shadowing Robust BIOS flash Update with rollover capability of each CPU engine Advanced Configuration and Power Interface (ACPI 1.0, 2.0 & 3.0) Console redirection to serial port (VT100)with CMOS setup access, and SOL (Serial over LAN) Field updateable BIOS Event (SERR, PERR, correctable/uncorrectable ECC, POST errors, PCI-Express) log support to IPMC
- Board Size: PICMG3.0 R2.0 - ATCA (upcoming R3.0 targeted) PICMG3.1 R1.0 - Ethernet/Fiber Channel ATCA AMc.0/1/3
- Bus Interface: CPUs Front Side bus at 667 MHz, 64-bit data, 36-bit address Memory bus at 400 MHz, 144-bit data (2 channel)
- Cache Memory: 4 MB of L2 cache dedicated for each core.
- Certifications: UL, CE, NEBS Level 3 (designed for), FCC B; CP-TA
- Chipset: Intel® 3100 MCH
- Connector: 2x 10/100/1000 Base-T RJ45 on CPU 0 1x serial RJ45 4x USB 2.0 Front (2x CPU 0 & 1x CPU 1 & 1x CPU 2) Push-button on Front for serial port
- Environment: Operating Storage and Transit Temperature*: 0 to 55 °C / 32 to 131°F -40 to 70°C / -10 to 158°F Humidity*: 5% to 90% @40°C / 104°F 5% to 95% @40°C / 104°F non-condensing non-condensing Altitude*: 4 000m / 13,123 ft 15 000m / 49,212 ft Shock*: 5G each axis Belcore GR-63-CORE Section 4.3 Vibration*: 5-500Hz. 1G, each axis 5-50Hz, 2G; 50-500Hz, 3G each axis Airflow: TBD
- Ethernet: On board Ethernet Switch (24-Port GbE Multilayer) 10-Gigabit XAUI fabric connection to Fabric Interface Optional “Small Mesh” configuration, i.e. full mesh topology for smaller 5 or 6-slot chassis Power PC Processor for switch management Core frequency >1GHz External memory on SO-CDIMM (512MB DDR2 400 MHz with ECC support)
- Expansions: CPU 0 supports 1 Mid-Size AdvancedMC bay AMC.1 Type 4 compliant – x4 PCI Express, AMC.3 compliant – dual port SAS/SATA
- FSB: Two redundant 1MB BIOS (Field software upgradeable) Roll back functionality controlled by IPMC
- IrDA: Management Controller compliant to PICMG 3.0, AMC.0, Rev 2.0 and IPMI v1.5 rev 1.1. SMHC: AT8030 behave exactly like Carrier AMC that includes 3 processors AMC + 1 AMC Bay Remote control capability of each CPU engines via any IPMI channels (power cycle / warm reset / cold reset) Robust IPMI flash Update with rollover capability and without any payload impact of each management controller (HPM.1 ready) Extensive sensors monitoring and event generation on thresholds, including overheat alarms Standard IPMI host interface with IPMI watchdog for each CPU engine Serial over LAN (+LAN access to BIOS menu setup) and IPMI over LAN (IPMI v2.0) from each CPU engine Management Controller self test which can detect failure under its code integrity and trigger an automatic rollback. CPU Remote warm/cold reset via standard PICMG FRU control command Fast interrupt driven SMS host interface compliant to IPMI-KCS v1.5 rev 1.1 Hardware config that allows activation of the blade or AMC without Shelf Mana
- Operating Humidity: Red Hat Enterprise Linux V.5, Wind River Linux PNE 1.4
- Power Requirement: TBD W* -38V @ -72V * The power consumption will vary depending on your product configuration
- Processor: - 3x Intel Core 2 Duo L7400 LV Processor (3 separate engines) - Core frequency >1.5GHz - Automatic Thermal Management Intelligence for CPU 0/1/2
- Rear I/O: MTBF: >TBD hours Whole board protected by active breaker USB voltage protected by an active breaker
- SATA: Safety: UL 60950-1; CSA C22.2 No 60950-00; EN 60950-1:2001; IEC60950-1 EMI/EMC: FCC 47 CFR Part 15, Class A; CE Mark to EN55022/EN55024
- Socket: Supports a system management interface via an IPMI V1.5 compliant controller Watchdog for BIOS execution and OS loading (through IPMI watchdog) Hardware system monitor (voltages, temperature), CPU temperature monitor / alarm; board temperature sensor, power failure through IPMC
- Storage Devices: CPU 0 supports 2 ports SAS available via AdvancedMC card or through Rear I/O Onboard PATA Flash drive (2GB)
- System Memory: CPU 0 : Up to 8GB DDR2 400 MHz, ECC, SDRAM on 2 DIMM sockets CPU 1&2 : Up to 4GB DDR2 400 MHz, ECC, SDRAM on 1 DIMM socket Up to 4GB of Flash Disk for each CPU engine
- WTD: Two years limited warranty
Applications
- None Available
Aliases
- None Available
