CP306 - Kontron CP306 CPU Board. 3U CompactPCI | Pentium M Up...
- Part Number:
- CP306
- Model Number:
- CP306
- Make:
- KONTRON
- Lead Time:
- Available
- Qty In Stock:
- Available
Kontron CP306 CPU Board. 3U CompactPCI | Pentium M Up to 1.8GHz | LV | 2MByte L2 Cache | Up to 1GByte DDR-SDRAM | Optional 3.3V I/O Simple Type: CPU Board
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- 1 MB onboard FWH for BIOS
- 400 MHz processor system bus
- 4HP or 8HP, 3U CompactPCI
- 855GME and 82801 (ICH4) chipset
- Analog display support up to 2048 x 1536 pixels at 16-bit and 60 Hz
- Compatible with CompactPCI spec. Rev. 3.0
- Extended temperature range: -40°C to + 85°C (optional)
- Four USB ports
- Hardware Monitor (LM87)
- I/O extension connector (LPC, AC97 Link)
- Integrated 3D high performance VGA controller
- Intel Pentium M microprocessor up to 1.8 GHz
- Jumperless board configuration
- Onboard CompactFlash type II socket (True IDE with DMA)
- One 32-bit PCI-to-PCI bridge at 33 MHz
- One Fast Ethernet interface (82559-style)
- One Gigabit Ethernet interface (82541PI)
- Passive heat sink solution
- PCI extension connector
- Phoenix BIOS
- Real-time clock
- Several rear I/O configurations
- Two COM ports on Rear I/O (with an optional two on the front I/O on 8HP version)
- Two EIDE Ultra ATA/100 interfaces
- Two Front USB 2.0
- Two Rear I/O USB 2.0
- Up to 1024 MB DDR SDRAM memory running at 333 MHz (PC2700)
- Up to 2048 kB L2 cache on-die, running at CPU speed
- Watchdog timer
Specifications
- Bus Interface: PICMG 2.0 Rev. 3.0 compatible, 32-bit/33MHz System master 5V VI/O (3.3V on request), 7 Req/Gnt & clock lines Version with rear I/O on J2 PICMG 2.0
- Connector: 4HP board: Ethernet: 1st: Intel82541PI based 10/100/1000MBit/s Gigabit Ethernet controller at front 2nd:Intel82801DB ICH4 10/100Base-TX Ethernet controller (based on 82559; front or rear IO) VGA: Intel82855GME GMCH internal VGA controller providing 2048x1536x8bit/60Hz resolution, max. shared memory 64MB USB: 4x USB2.0 channels up to 480Mbit/s, 2 as front IO, 2 as rear IO COM: UART with two 16C550 compatible RS232 ports as rear IO IDE: Two EIDE interfaces, Ultra ATA\100, 100MB/sec Primary port ATA\33 connected to CompactFlash socket & rear IO Secondary port ATA\100 40-pin, 2.54mm connector onboard 8HP additions: COM: Additional 2 COM ports (front IO), 4 COM ports in total PS/2: PS/2 for keyboard and mouse legacy support (front IO) IDE: Secondary port ATA\100 two 40-pin, 2.54mm connector s, one for onboard 2.5" EIDE Flash Disk or HDD mounting option, anotherone for external devices like CD-ROM Floppy: Standard Floppy connector LPT: The parallel port is accessible as onbo
- Cooling: CompactPCI Core Specification PICMG 2.0 Rev. 3.0 CompactPCI Hot Swap Specification PICMG 2.1 R2.0 Designed to meet or exceed: - Safety: UL 1950, UL 94, CSA 22.2 No 950, EN 60950, IEC 950 - EMI/EMC: EN 55022 / EN 55024, EN 50081-1 / EN 6100-6-2"
- Environment: Operating temp.: 0C to +60C standard -40C to +85 C E2 (optional, 1.4GHz LV) Storage temp.: -55C to +85C Climatic Humidity: non condensing 93% at 40 C (acc. to IEC 60068-2-78) Altitude: 50,000 ft. (15,240 m)
- Max Data Transfer Rate: 333 MHz memory speed, Intel 82855GME GMCH 512MByte or 1GByte soldered DDR-SDRAM with ECC CompactFlash socket type II (Flash or Microdrive HDD) Onboard 2.5" HDD mounting within 8HP 1MB Firmware Hub for BIOS 8KByte EEPROM for CMOS data storing (no battery operation)
- Max. Speed: Phoenix BIOS with QuickBoot, QuietBoot, BootBlock, MultiBoot III, PC Health Monitoring, Serial port remote control with CMOS setup access, BIOS parameters saved in EEPROM, diskless, keyboardless, videoless operation. LAN boot support. USB Floppy boot, USB memory stick boot. Plug&Play capability. Board identification number accessible via EEPROM Support for Windows 2000, XP Pro, XP Embedded, Linux, VxWorks, (other OS’s may be possible, please contact us for information).
- Memory: Dimensions: 100mm x 160mm Weight: 300g / 4HP, 400g / 8HP MTBF: 117,000h
- Miscellaneous: 4HP: Ethernet: Two RJ-45 with integrated LEDs (ACT, SPEED) Top connector: VGA-CRT 15-pin D-Sub SVGA connector USB: Two 4-pin connectors LED·s: ACT, SPEED (LAN), Thermal, Watchdog or both general purpose 8HP: Additional to 4HP COM1/2: Two 9-pin D-Sub (RS232/422/485 jumper selectable) Keyb/Mouse: PS/2 Reset: Reset button, guarded LED: HDD active
- OS: Support for all signals to allow peripheral boards to be hot swapped. The individual clocks for each slot and access to the backplane ENUM# signal comply with the PICMG 2.1 Hot-Swap specification.
- Power Mode: +5V/ 7W, +3.3V/ 6W, typ. 13W at 1.4GHz +5V/ 8W, +3.3V/ 9W, max. 17W at 1.4GHz +5V/17W, +3.3V/5W, typ. 22W at 1.8GHz +5V/27W, +3.3V/9W max. 36W at 1.8GHz +12V / -12V not used
- Processor: Intel Pentium M 1.8GHz
- Processor: Mobile low power PentiumM processor in Micro-FCBGA 479 package 2x 32KB L1 cache and 2MByte L2 cache, 400MHz processor system bus. Long term available versions: - 1.4GHz LV low power dissipation, extended temperature range option - 1.8 GHz Maximum internal junction temperature 100C All board versions are passive cooled with fanless heatsink within 4HP height. Forced air cooling at a specific flow rate is required depending on the processor version.
- Socket: Watchdog, software configurable, 125 msec to 256 sec. in 12 steps, generates IRQ, NMI or hardware reset, two stage configuration for NMI and Reset Hardware monitor LM87 for thermal control, fan-sense and all important onboard voltages ICH4 internal RTC (MC146818 compatible), RTC and 256 Byte CMOS RAM with backup, battery replaceable
- System Monitor: PCI and LPC (Low Pin Count - the ISAbus replacement) build the connection between the basic CPU board with any I/O extension module, resulting in a double slot (8HP) solution.
- Wake On LAN: The Rear I/O versions support: - 32-bit/33 MHz CompactPCI interface - Two USB ports - One Fast Ethernet port without LED - Primary EIDE Port - Two COM ports (TTL level) - CRT VGA port - One fan control input - One general purpose output - Input for external backup battery
Applications
- None Available
Aliases
- None Available
Related Items
CP306-V
Celeron M 600MHz (313) / 1.3GHz (320), Industry tailored CPU
CP6001
Kontron CP6001 CPU Board - With the 1.2 GHz Intel
CP6010 (EOL)
cPCI/PICMG 2.16 Dual Xeon Low Voltage up to 2.4GHz System/Peripheral- DT64 (EOL)
cPCI/PICMG 2.16 Dual Pentium III 1.26GHz w/ Gigabit Ethernet, Ultra160