KONTRON Industrial Partner

Kontron ETX-CN8 CPU Board. With VIA C7/Eden processor | VIA CN896 and VIA VT8237S | 2x Serial ATA 300 for highspeed drives | Up to 2 GB DDR2 SODIMM memory Simple Type: CPU Board

ETX-CN8 is the latest Computer On Module based on ETX 3.0 standard. The new ETX-CN8 module is based on the VIA C7 processor and VIA Eden processor as well as the VIA CN896 and VIA VT 8237S chipset. ETX-CN8 modules also will provide the following interfaces that are always located in the same physical position on each board, thus guaranteeing scalability between modules. It also takes advantage of the new ETX 3.0 specification that allow for 2 Serial ATA 300 ports without violating the existing ETX 2.8 pin usage. For further expansions two IDE ports with Ultra66 DMA capabilities are available. They do not provide the PCI bus only, the ISA bus signals are also available. A lot of existing ISA boards can still be used via an ISA slot on a baseboard. This avoids expensive redesigns and well proven ISA cards to PCI versions for standard PC motherboards. PCI32, USB 2.0, Serial ATA 300, Parallel ATA, LVDS Multi Media ports as well as an ACPI (Advanced Configuration and Power Interface) for optimized power management. The JILI display interface technology ensures automatic setting of the video controller parameters for the attached LCD panel. Five mounting holes on the board provide secure mounting to allow the module increased shock and vibration resistance.

Download the datasheet (PDF)