ETX®-PM3-14 - ETX®3.0 module with Intel® Pentium® M Processor LV 738 (1.4 GHz) and Intel® 82855GME, 2x SATA

ETX®-PM3-14 - ETX®3.0 module with Intel® Pentium® M Processor LV 738 (1.4...

ETX®3.0 module with Intel® Pentium® M Processor LV 738 (1.4 GHz) and Intel® 82855GME, 2x SATA Simple Type: - TBD -

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.

General

Cache Memory: up to 2MByte 2nd Level
Chipset: Intel® 82855GME, 400MHz FSB, integrated graphics Intel® 82852GM, 400MHz FSB, integrated graphics
Dimensions: 95 x 114mm (3.7x4.5“)
DIO: 1 GByte max. DDR-SO-DIMM, PC1600/2100/2700
Environment: Temperature: operation: 0° to 60°C, storage: -30° to 85°C Humidity: operation: 10% to 90%, storage: 5% to 95% (non condensing)
Expansion BUS: 10/100Base-T Intel® 82562
FDD: shared with LPT
Hard Disk: Two enhanced IDE ports
LVDS Panel Support: Dual Channel LVDS 110 MHz
Parallel: shared with Floppy
Power Requirement: typical 13.9W @ 5V (1.4 GHz CPU)
Power Requirements: 2x TTL (16550 compatible), IrDA support
Processor: up to Intel® Pentium® M Processor 745 (1.8 GHz) and 738 LV (1.4GHz) Intel® Celeron® M Processor ULV 373 (1.0 GHz) and 370 (1.5 GHz) Intel® Celeron® M Processor 600 MHz, 512 KB L2 Intel® Processor 800 MHz 0KB L2
SATA: 2x SATA 1 ports, controller VT6421A, 150 MBytes/sec, RAID 0/1 support
Serial: AC97 controller, line-input / output and mircophone
Storage Temperature: max. CRT WUXGA/QXGA (2048x1536), max LCD WUXGA/UXGA (1600x1200)
Suspend Modes: S0 / S1 / S3 - Suspend to RAM (S3 hot & S3 cold) / S5
USB: 4x USB 2.0 OHCI ports
VRAM: Intel® Extreme Graphics2 controller, LVDS Flatpanel and CRT output, Up to 32 MByte UMA Video RAM