EPCI-100 - Kontron EPCI-100 CPU Board - Half Size ePCI-X Pentium III...
- Part Number:
- EPCI-100
- Model Number:
- EPCI-100
- Make:
- KONTRON
- Lead Time:
- Available
- Qty In Stock:
- Available
Kontron EPCI-100 CPU Board - Half Size ePCI-X Pentium III 1GHz Simple Type: CPU Board
The ePCI-100 is Kontron’s flagship single board computer for the industry-wide PICMG 1.2 Embedded PCI-X standard. An industry-wide approved specification that brings PCI-X technology to the embedded marketplace. Based on the popular Kontron half-size VIPer SBC line, the ePCI-100 comes standard with a rich feature set including a choice of Intel Pentium III or Celeron processors, up to 512MB of SDRAM, dual 10/100Base-TX Ethernet ports, dual IDE hard disk interface and a built-in 2D/3D 64-bit CRT video controller for video support.
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- ePCI-X passive backplane or stand-alone operation
- Integrated 2D/3D 64-bit CRT video controller with DVI output
- Intel Celeron from 566 to 733MHz 66/100/133MHz front side bus 100MHz SDRAM bus
- Intel Pentium III from 600 to 1GHz
- PC/104+ bus compatible, PCI-Only (no ISA connector)
- Two 10Base-T/100BaseTX Ethernet ports
- Two Enhanced IDE hard disk interface (Ultra DMA/66)
- Two-stage software programmable Watchdog Timer
- Up to 512MB of Synchronous DRAM (SDRAM) on two 144-pin SODIMM socket
Specifications
- 256-byte CMOS RAM
- 256KB Advanced Transfer Cache (64-bit wide on-die full speed Level 2 pipelined burst)
- Compatible with CGA, EGA, Hercules, MDA, VGA, SVGA, XGA, and SXGA
- CRT resolutions up to 1600x1200x64K colors, non-interlaced
- EIDE: Two Enhanced IDE interfaces; support fortwo IDE drives (master/slave configuration); PIO Mode 0-4 and Ultra DMA/66
- Ethernet: Two Intel 82559ER Ethernet controllers, PCI10/100Base-TX ports
- Floppy Disk: Support for one drive (360KB to 2.88MB)
- Intel 82810E
- No direct flat panel support (must go through DVI connector)
- Parallel port: One bi-directional with all IEEE 1284 protocols supported, BIOS selectable IRQs and addressing
- PCI Bus, 32-bit 33MHz
- Pentium III processor – 600/700/850MHz (bus speed at 100MHz)
- Pentium III processor – 733/866MHz/1GHz (bus speed at 133MHz) Chipset
- Serial Ports: Two (COM1: RS-232, COM2: Configurable as RS-232/422/485)
- Silicon Serial ID TAG for unique board identification accessible via software
- SMBus
- Standard 3.3V single-sided or double-sided SODIMMs (requires PC100 SDRAM)
- USB Ports: Two (Version 1.1)
- Bus Interfaces: Front Side Bus 66MHz/100MHz/133MHz determined by CPU
- Cache: 128KB Instruction / Data CPU-internal Level 1
- Clock/Calendar: Real-time clock with (replaceable) battery backup
- CPU: Celeron processor –566, and 733 MHz (bus speed at 66MHz)
- Data Path: 64-bit on CPU and video memory; 32-bit on local PCI
- Flash Memory: 4KB Serial EEPROM for user configuration
- I/O: Super I/O Controller: LPC47B27X
- Memory: Two 144-pin SDRAM SODIMM supports (long/1.25”, short/1”) memory configurations up to 512MB
- Processor: Intel Pentium III
- Video: Integrated 2D/3D 64-bit CRT video controller with DVI output
Applications
- None Available
Aliases
- None Available
