AT8901 - Kontron AT8901 Hub - The Kontron AT8901 is an AdvancedTCA...
- Part Number:
- AT8901
- Model Number:
- AT8901
- Make:
- KONTRON
- Lead Time:
- Available
- Qty In Stock:
- Available
Kontron AT8901 Hub - The Kontron AT8901 is an AdvancedTCA Base Hub board that is PICMG 3.0 and 3.1 compliant & built to support two Mid-Size or Full-Size AdvancedMC modules. Simple Type: Hub
Highly Flexible Entry-level Base Hub The Kontron AT8901 is an AdvancedTCA Base Hub board that is PICMG 3.0 and 3.1 compliant. Built to support two Mid-Size or Full-Size AdvancedMC modules, the AT8901 is the ideal entry-level hub platform that provides maximum design flexibility. Full Redundancy and High Availability Suitable for dual-star configurations in 14- and 16-slot systems, the AT8901 is hot swappable, supports full redundancy, Layer 2 / 3 protocols (option for Layer 4), and provides flexible Gigabit Ethernet uplink options via front panel and RTM. AdvancedMC-Everywhere integration for customization With the support for two AdvancedMC modules, the AT8901 enables costoptimised customization for a wide assortment of application requirements. The AT8901 may be enhanced by various AdvancedMC modules, such as processing (acting as the system controller which saves one AdvancedTCA slot); HDD as mass storage device; and I/O GbE inter-link to enable multi-shelf AdvancedTCA systems.
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- 4x GbE uplinks on front panel
- Advanced Level 3, IPv4 & IPv6
- GbE connections to AdvancedMC slots
- IPMI v1.5 support
- Non-blocking layer 2 / 3 switching /routing
- Options for QoS support and Jumbo Packet line rate switching
- PICMG 3.0 and 3.1-compliant base interface (GbE) switch
- Supports 14- and 16-slot AdvancedTCA shelves
- Two Mid-Size OR Full-size AdvancedMC slots for customisation
Specifications
- Altitude (Meet or Exceed): Operating:4,000 m (13,123 ft); Storage and Transit:15,000m / 49,212 ft
- Base Interface (PICMG 3.0): Non-blocking layer 2 / 3 switching; 1 x GbE connection to one AMC slot
- Board Management: Based on IPMI 1.5; FRU Management; Sensors (Voltage, Current, Temperature, Fuse); Status and Alerting; Hot Swap; Electronic Keying of Base Interfaces
- Ethernet: Broadcom fifth generation of StrataSwitch/StrataXGS product line; 24 10/100/1000 Mbps Ethernet ports; Line-rate switching for all packet sizes and conditions; On-chip data packet memory and table memory; Advanced Fast Filter Processor (FFP) ContentAware classification; Advanced security features in hardware; Port-trunking and mirroring supported across stack; Advanced packet flow control:; Head-of-line-blocking prevention; Back pressure support; Standard compliant 802.1ad provider bridging; IEEE 1149.1 (JTAG) boundary scan
- General Compliances: The AT8901 conforms to the following specifications:PICMG 3.0 AdvancedTCA Base Specification, Revision 2.0, and 3.1, AMC.0 AMC Base Specification, D0.96 of AMC.2 Revision 1.0 Gigabit Ethernet, D0.9d of AMC.3 Revision 1.0 Storage, IPMI v1.5 Intelligent Platform Management Interface Specification
- Humidity (Meet or Exceed): Operating:15%-90% (non-condensing) at 55°C (131°F); Storage and Transit: 15%-90% (non-condensing) at 55°C (131°F)
- Interfaces on front panel: 4 X 10/100/1000Base-T Uplinks for Base Interface (B1-B4); 1 X 10/100Base-T Management; 1 X RS232 Management; 8 RTM Channels from each AMC Slot; Storage interface for HDD or Flash mass storage (SAS/SATA/FC) from each AMC Slot
- Interfaces to ATCA Backplane: Zone 2 connectors; Base channel 1: 1/2 x Ethernet to ShMC(s) (10/100/1000Base-T); Base channels 2-16: 1 x GbE (1000Base-T); CLK 1/2/3 A/B; Update Channels: 4 x GbE (1000Base-BX); Zone 1 connector; Power; IPMB A; IPMB B
- Management & Protocols: Management via SNMP, TELNET, CLI, In-band & Out of band via Ethernet or RS232; IPMI version 1.5; Ethernet/Bridging protocols include:Link aggregation (802.3ad), VLANs (802.1Q), Spanning tree (802.1D, 802.1w), Flow control (802.3x), GVRP, GMRP
- Mechanical: 8U form factor mechanically compliant to PICMG 3.0 and 3.1; 2 Full-Size or Mid-Size AMC Slots; 280 mm x 322 mm (11.024“ x 12.677“); 1,8 kg
- MTBF: Targeted MTBF is 150,000h @ 30°C, calculations based on Bellcore/Telcordia SR-332 Issue 1
- Physical & Environmental: Size: Single slot ATCA board; Power: 50W typical without AMCs
- Processor & Memory: IBM PowerPC 405 32-bit RISC processor core operating up to 400MHz with 16KB I- and D-caches; PC-133 synchronus DRAM (SDRAM) interface; 40-bit interface serves 32 bits of data plus 8 check bits for ECC applications
- Project Customization w/ AdvancedMC Slots - Mid-size/Full-size: Processor-AMC; Storage-AMC; I/O - AMC
- Shock (Meet or Exceed): Operating:30G/11 ms half sine; Storage and Transit:50G, 170 inches/second trapezoidal
- Temperature (Meet or Exceed): Operating:0 °C to 55 °C; Storage and Transit: -40 to +70°C / -10 to 158°F
- Vibration (Meet or Exceed): Operating:5 to 100Hz: 1G @ 0.25 Octave/minute; Storage and Transit:5 to 50Hz: 0.5G @ 0.1 Octave/minute
Applications
- None Available
Aliases
- None Available
