AT8902 - Kontron AT8902 Switch-AT8902 is an AdvancedTCA Base and Fabric Switch...
- Part Number:
- AT8902
- Model Number:
- AT8902
- Make:
- KONTRON
- Lead Time:
- Available
- Qty In Stock:
- Available
Kontron AT8902 Switch-AT8902 is an AdvancedTCA Base and Fabric Switch board that is PICMG 3.0/3.1 compliant & built to support two Mid-Size or two Full-Size AdvancedMC modules. Simple Type: Switch
Versatile Base and Fabric AdvancedTCA Switch The Kontron AT8902 is an AdvancedTCA Base and Fabric Switch board that is PICMG 3.0/3.1 compliant. Built to support two Mid-Size or two Full-Size AdvancedMC modules, the AT8902 is the ideal high-end switch platform that provides maximum design flexibility for a wide range of wireless and wireline network applications, and employs leading-edge switching technology for full wire-speed throughput during all load conditions for any network topology. Full Redundancy and High Availability Suitable for dual-star and full-mesh configurations in 14- and 16-slot systems, the AT8902 is hot swappable, supports full redundancy, Layer 2 / 3 protocols (option for Layer 4), and provides 2x 10 Gigabit Ethernet uplink options via one AdvancedMC slot.
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- 2 Mid-Size or Full-Size AdvancedMC module slots for customization
- 2 x 10 GbE connections to one AdvancedMC slot
- 4x GbE x Base/Fabric uplinks on front panel
- Advanced Level 3, IPv4 & IPv6
- IPMI v1.5 support
- Non-blocking layer 2 / 3 switching /routing
- Options for QoS support and Jumbo Packet line rate switching
- PICMG 3.0/3.1-compliant base interface (GbE) switch
- Supports 14- and 16-slot AdvancedTCA shelves
Specifications
- Altitude (Meet or Exceed): Operating:4,000 m (13,123 ft); Storage and Transit:15,000m / 49,212 ft
- Base Interface(PICMG 3.0): Non-blocking layer 2 / 3 switching/routing
- Board Management: Based on IPMI 1.5; FRU Management, Sensors (Voltage, Current, Temperature, Fuse), Status and Alerting, Hot Swap, Electronic Keying of Base and Fabric Interfaces
- Ethernet: Broadcom fifth generation of StrataSwitch/StrataXGS product line; 24 10/100/1000 Mbps Ethernet ports; Line-rate switching for all packet sizes and conditions; On-chip data packet memory and table memory; Advanced Fast Filter Processor (FFP) ContentAware classification; Advanced security features in hardware; Port-trunking and mirroring supported across stack; Advanced packet flow control:; Head-of-line-blocking prevention, Back pressure support, Standard compliant 802.1ad provider bridging, IEEE 1149.1 (JTAG) boundary scan
- Fabric Interface(PICMG 3.1): Non-blocking layer 2 / 3 switching/routing with VLANs, Dual GbE services to redundant Hub Board, Dual GbE services to payload slots 2-5, GbE service to payload slots 6-15
- General Compliances: The AT8901 conforms to the following specifications:PICMG 3.0 AdvancedTCA Base Specification, Revision 2.0; PICMG 3.1 Ethernet/Fibre Channel for AdvancedTCA Systems, Revision 1.0; AMC.0 AMC Base Specification; AMC.1 PCI-Express and Advanced Switching on AMC; D0.96 of AMC.2 Revision 1.0 Gigabit Ethernet; D0.9d of AMC.3 Revision 1.0 Storage; IPMI v1.5 Intelligent Platform Management Interface Specification
- Humidity (Meet or Exceed): Operating:15%-90% (non-condensing) at 55°C (131°F); Storage and Transit:15%-90% (non-condensing) at 55°C (131°F)
- Interfaces on front panel: 4 X 10/100/1000Base-T Uplinks for Base Interface (B1-B4); 4 X 10/100/1000Base-T Uplinks for Fabric Interface (F1-F4); 1 X 10/100Base-T Management; 1 X RS232 Management; 8 RTM Channels from each AMC Slot; Storage interface for HDD or Flash mass storage (SAS/SATA/FC) from each AMC Slot
- Interfaces to ATCA Backplane: Zone 2 connectors; Fabric channels 1-5: 2 x GbE (1000Base-BX); Fabric channels 6-15: 1 x GbE (1000Base-BX); Base channel 1 x Ethernet to ShMC(s) (10/100Base-T) [Although the Ethernet controller supports 1 Gb/s, the ShMC is set to 10/100Base-T.]; Base channels 2-16: 1 x GbE (1000Base-T); CLK 1/2/3 A/B; Update Channels: 4 x GbE (1000Base-BX); Zone 1 connector; Power; IPMB A; IPMB B
- Management & Protocols: Management via SNMP, TELNET, CLI:In-band, Out of band via Ethernet or RS232; IPMI version 1.5; Ethernet/Bridging protocols include:Link aggregation (802.3ad); VLANs (802.1Q); Spanning tree (802.1D, 802.1w); Flow control (802.3x); GVRP, GMRP
- MTBF: Targeted MTBF is 150,000h @ 30°C, calculations based on Bellcore/Telcordia SR-332 Issue 1
- Physical & Mechanical: Size: Single slot ATCA board; Power: 50W typical without AMCs; 8U form factor mechanically compliant to PICMG 3.0 and 3.1; 2 Mid-Size / Full-Size AMC Slots; 280 mm x 322 mm (11.024“ x 12.677“); 1,8 kg
- Processor & Memory: IBM PowerPC 405 32-bit RISC processor core operating up to 400MHz with 16KB I- and D-caches; PC-133 synchronus DRAM (SDRAM) interface; 40-bit interface serves 32 bits of data plus 8 check bits for ECC applications
- Project Customization with AdvancedMC Slots-Mid-Size/Full-Size: Dual 10GbE connection to one AMC slot; Processor-AMC; Storage-AMC; I/O - AMC
- Shock (Meet or Exceed): Operating:30G/11 ms half sine; Storage and Transit:50G, 170 inches/second trapezoidal
- Temperature (Meet or Exceed): Operating:0 °C to 55 °C; Storage and Transit:-40 to +70°C / -10 to 158°F
- Vibration (Meet or Exceed): Operating:5 to 100Hz: 1G @ 0.25 Octave/minute; Storage and Transit:5 to 50Hz: 0.5G @ 0.1 Octave/minute
Applications
- None Available
Aliases
- None Available
